Helps prevent storage damage Night flyer decals can make your craft more visible when stored or anchored in fields and airports. Night Flyer Decals can be seen with small amounts of overbeam lighting long before the driver of the vehicle is close enough for direct light visibility.
Help prevent errors on the runway An aircraft with Night Flyer Decals may be more visible by aircraft on the runway and may help prevent collisions as other aircraft approach the runway.
Search And Rescue Not every potential search and rescue aircraft is equipped with sophisticated infrared sensors or other high tech location equipment. Night Flyer decals can aid in your location and rescue by any aircraft equipped with downward lighting. Rather than detailed searching, a quick pass of light will cause the decal to retroreflect your location. Using a quickscan method of light operation, scanting speed can be increased by 90% in many cases. Location may be determined in minutes versus hours, depending on the condition of the craft, weather conditions, and obstructions that might block visibility from the air.
Night Flyer Aircraft Safety Decals
Minimum suggested applications would be 12" decals for wing application and a variety of sizes to mark the fuselage on the sides, top and bottom. Properly located and in quality, you want your aircraft to be identifiable from all angles approaching the runway and from all possible positions after an emergency or crash landing. Where there is no decal, there can be no reflection. The average craft will take more than 1 kit of each size.
AIRCRAFT LIFE SAFETY MARKER
The search and rescue life safety decal that can help prevent accidents on the runway or while the craft is stored and secured.
This highly reflective aircraft decal could help prevent accidents on the ground and may aid in rescue of you and your craft at night. Any airborne craft with sufficient down lighting can immediately locate your unobstruted craft within minutes.
Motorcycle Safety Marker
Streetglo's Night Rider motorcycle safety marker is designed to help call attention to your night position on the roadway. As with all reflective products, this should be combined with other reflective products located on key areas.
PLEASE NOTE: the 4.6 inch decal can be installed on the curved part of a non flat object such as a motorcycle helmet or fuel tank. However, if you are not comfortable with the stretching techniques shows at www.streetglo.info (see the biohazard decal video), then consider the 3.5" model which is easier to apply to curved objects.
MOTORCYCLE LIFE SAFETY DECAL
Night Riders - Show your colors
The official Night Rider Decal!
Motorcycle and Aircraft Safety Reflective Decals Markers;